Supplier · USA
Campbell Scientific in Sweden
Data loggers, sensors and complete measurement systems
Certified Campbell Scientific partnerFDS Mätteknik is a certified Campbell Scientific partner in Sweden. Campbell Scientific in Logan, Utah, has built rugged, low-power data loggers for over 50 years. We have worked with them for over 30 years, supply the whole range and program, install and service the systems here in Sweden.
Campbell Scientific data loggers
The logger is the heart of the station. It reads the sensors, calculates averages, raises alarms when needed and passes the data on. We help you choose a model based on the number of sensors, power and communication.
Data logger
CR1000Xe
The successor to the CR1000X and a good fit for most weather and water stations. It takes a 10 to 36 V supply, and programs written for the CR1000X run the same way.
More about the CR1000Xe →Data logger
CR6
Twelve universal channels for measurement systems with many different sensor types, such as vibrating-wire sensors.
More about the CR6 →Data logger
CR350 and CR310
Compact, affordable loggers for smaller weather and water level stations. The CR350 replaces the CR300, CR800 and CR850.
More about the CR350 and CR310 →
Campbell Scientific sensors and systems
A selection of sensors we often build into our stations. They connect to the logger alongside sensors from other manufacturers.
Weather
ClimaVue 50 G2
A compact weather station measuring wind, temperature, humidity, pressure, precipitation, solar radiation and lightning in one unit, with SDI-12.
Temperature and humidity
HygroVue 10 and HygroVue 5
Digital temperature and humidity sensors with SDI-12. The HygroVue 10 measures temperature with ±0.1 °C accuracy between 20 and 60 °C.
Visibility and weather
AtmosVue 30, CS125 and CS120A
Visibility and present weather for roads, airports and ports.
Cloud height
SkyVue PRO
A ceilometer measuring cloud height in up to four layers and vertical visibility, up to 10 km.
Snow depth
SnowVue 10
An ultrasonic sensor measuring snow depth up to 9.6 metres, with SDI-12. It replaces the SR50A.
Soil moisture
SoilVue 10, CS655 and CS616
Soil moisture, conductivity and temperature. The SoilVue 10 measures at up to nine depths in a single hole.
Rock movement
TDR200
A TDR instrument that monitors deformation in rock and slopes through long coaxial cables in boreholes.
Water level
CS451, CS456 and RangeVue
Pressure transducers in stainless steel or titanium, and radar that measures water level without contact, to within ±2 mm.
Turbidity
ClariVue 10 and ClariVue 20
ISO 7027 turbidity sensors for 0–4000 FNU. A Zebra-Tech Hydro-Wiper keeps the window of the ClariVue 10 free from fouling.
- The ClariVue 10 was previously written ClariVUE10.
Solar radiation
CS320 and CS241
A digital Class C pyranometer, and a PV module temperature sensor that meets IEC 61724 Class A.
Solar power
MeteoPV, SunSentry and DustVue
Systems for monitoring solar parks.
Eddy covariance
IRGASON and EasyFlux
Gas analyser and sonic anemometer in one sensor, and programs that calculate CO₂, water and heat fluxes in the logger.
The full range is on the manufacturer’s website: campbellsci.eu ↗
Why buy Campbell Scientific through FDS
The right logger and sensors
We help you choose logger, sensors, power supply and communication for the site and the task.
CRBasic programming
We write, test and maintain the logger programs, with calculations, alarms and control to your requirements.
Older loggers
We look after stations with older loggers programmed in EDLOG, and move the programs over when it is time to replace the logger.
Integration
Modbus, SDI-12 and RS-485 to sensors and control systems, with data passed on to your own system or Airviro.
Local service
Troubleshooting, spare parts, repairs and service agreements, with a short path to the person who built the system.
Training
We teach your staff to handle the loggers and to write and change programs in CRBasic.
Frequently asked questions about Campbell Scientific
How do we buy Campbell Scientific in Sweden?
Email or call us for a quote. We are a certified Campbell Scientific partner and reseller and supply data loggers, sensors, accessories and spare parts throughout Sweden.
Can you help with a station we already have?
Yes. We troubleshoot, update programs and service existing stations with Campbell Scientific loggers, also when someone else built them. Read more about support and programming.
Do you write logger programs for us?
Yes. We write new programs in CRBasic and change existing ones, with calculations, averages, alarms and control, and test them before the station goes into service.
We have an old logger. What should we do?
Many older loggers still work, and we can change their programs. When it is time to replace the logger, we rewrite the program for a new one so that the data series continues. Read more about older loggers.
Can the station send data to our own system?
Yes. Data is collected by telemetry into our data collection systems, including Airviro, and delivered as files or through an interface. The logger can also be connected directly to your control system via Modbus.
Do we buy equipment only, or the whole station?
Your choice. We sell individual loggers, sensors and spare parts, and we deliver complete stations with design, installation, data collection and service.
Solutions with Campbell Scientific
Need a quote for Campbell Scientific equipment?
Write a few lines about what you want to measure, and we will help you choose logger, sensors and communication.